Hotan Red
date
Benefiting
from Danghe River alluvial fan areas, deep layer,
fertile soil and strong permeability, Jun Jujube orchards, located at 40° N, is
considered as the world's best growing areas for jujube. The farm located in
the northwest of China
belongs to the typical inland temperate desert climate. Its annual
precipitation is 36.9mm and the evaporation is 2486mm. The effective
accumulated temperature is 3611 ℃ and the year's total duration of bright sunshine is 3246.7
hours. The large temperature difference between day and night is very conducive
to dry material accumulation. Irrigation water from the Qilian Mountains
is pure and clean.
Characteristics of Hotan Red date
1.Rich in minerals& vitamin
4,Higher sugar with good smell and flavor.
5.Cleaning
with purified water without any additives, UV sterilizatio. Safty red
dates.
Hotan Red date usage:
Tea, Medicines, Healthcare
products, Pharmaceutical raw material, extract raw material, cosmetic products
Hotan Red dated summary
1. Processing: Natural
air dried
2. Origin: In Akesu
Town, Xinjiang Province, China
3. Material: the best Chinese dates
4. Packing: 500g, customer`s request is available.
5. Features: Ready to eat, rich in
vitamins and fibres
6. Storage condition: normal room temperature
and prevent moisture.
Red Dates,Fresh Red Dates,Dried Red Dates,Wholesale Red Date Ningxia Baishi Hengxing Food Technology Co., Ltd. , http://www.chinagojihome.com
Below 20°C, the fly stops breeding or enters a hibernating state and does not feed. Plastic sheds can only be cultivated seasonally. Late autumn, winter, and early spring temperatures do not meet the requirements, and shed farming is futile.
Feeds for fly maggots Production feeds for fly maggots must be cheap waste, preferably chicken manure produced by specialized chicken farmers. According to 3 kg of chicken manure and 1 kg of pupae, the amount of feed required for productive aquaculture is large. If you buy soy sauce residue, bean curd residue or other waste, the cost is too high, and the result is often outweighed.
Self-eliminating ability The best breeding facility for fly maggot production is poultry and fish breeding specialized households, which can be used for self-producing and self-selling to reduce the feed cost of poultry and fish and increase economic efficiency.
The site selection of breeding sites for fly aphid breeding is to a large extent unhealthy. Therefore, the following points must be noted when selecting breeding sites:
Staying away from residential areas, chicken manure or other wastes accumulate in the hospital, adults fly into the room and affect human health.
Pay attention to the perennial wind direction. Pay attention to the local dominant wind direction. Place the fly maggot farm on the downwind side of the chicken farm to avoid odors drifting into the rearing room and chicken house, affecting the healthy growth of breeders and chickens.
Keep away from water sources The fly maggot farms must stay away from self-contained sources of water and public water sources to prevent sewage from seeping into the ground, causing deterioration of water quality and affecting the use of chickens.
Waste dumps Production sites for fly maggots must have dedicated sites for the stacking of chicken dung and fly maggots to prevent environmental pollution.
The area where the breeding room and shed were constructed and the heat preservation room and the shed area were calculated based on 1 square meter for each 1 kg fly larvae. Excessive room or shed is not conducive to heat preservation, and too small can not guarantee production. This is a big problem for fly maggot farming, which involves investment issues. Funds allow the construction of cold insulation rooms for perennial farming; insufficient funds can engage in greenhouse seasonal farming. Simple outdoor farming is affected by temperature and rainwater. Longer farming time in the south and shorter northern China, this way of cultivation can neither guarantee production but also impede environmental sanitation and should not be promoted. The following points should be noted in the construction of a production breeding shed:
Cold insulation In order to ensure that the temperature in the shed is above 25°C, the wall must have a certain thickness, the doors and windows must be tight, and the room must have heating and temperature adjustment facilities. The summer temperature of plastic sheds is too high, and it is difficult to reach 25°C in the cold season, so it is not suitable for breeding.
Rain and rain shelter breeding should pay attention to rain, so as not to undermine the fly breeding environment. During the summer season, we must also pay attention to avoid sun exposure and prevent the fly maggots from being hardened to cause the locusts to die.
The specific structure, size, and shape of the room and shed can be adapted to local conditions. It is not necessary to force the sheds to be consistent and applicable.
Production-based management Management of production and management of fly maggots can be broadly divided into two parts, that of attracting flies, spawning and growth of pupa.
Because of the instinct for safe hatching, the female flies are often carried out in shelters or sheltered areas where nutrients are stored. To control this habit of female flies, plastic flake cans and cans can be used to store nutrients ( Meat bones, residual dregs, fish guts, watermelon rind, wheat bran, sugar liquid and other wastes) are placed in sheltered areas to attract flies and spawned. When the eggs hatch into aphids, they can be moved into chicken dung for growth.
During the growth and management of the fly, it is necessary to grasp the habit of no longer feeding on the feed after it has matured, and to start crawling into the soil to degenerate this habit. Collect or fly the fly larvae in time.
The fly maggots can be divided into two types, dry and wet. Dry-type rearing is: Spread chicken litter on plastic cloth or concrete floor, 80 cm wide, 10-15 cm high, and of unlimited length. After the fly eggs or hatched cubs are moved on, the sprinkling water is kept at a certain humidity, and the eggs or larvae can be hatched and grown. Wet breeding is: the room, the shed to build a 30 cm deep, 60-80 cm wide, unlimited length of the pool is not leaking, the pool of water, the chicken manure into a thick slurry, into the fly eggs, you can hatch Become successful and grow. Regardless of dry or wet feeding, when the fly larvae grow, it is necessary to clean up the worms in time and regularly replace the new chicken worms to increase the yield.
The fly larvae stored in the fly larvae, collected or collected, must be put into hot water and burned to death, and then they should be removed from the sun (baking) or directly mixed into the corn comminuted feed and fed in time. Stir in cornmeal for a long time to prevent mildew.
The fly larvae have more daily output, and they need to control the moisture after drying to facilitate long-term preservation. During the processing of fly maggots, we must pick out dead worms that are spoiled and deteriorated so as not to affect the quality of glutinous rice flour.
2.Thin skin, small kernel & thick- flesh
3. Natural air dried, uniform size with thick natural jujube flavor.
Flies breeding five points
Essential conditions for fly aphid breeding Natural conditions Temperature is a prerequisite for fly aphid breeding.