Agricultural machinery triangle belt points

Agricultural machinery triangle is widely used in agricultural machinery. The standardized triangular section is trapezoidal in shape. There are no joints in the entire circle and there are seven types of models: O-type, A-type, B-type, C-type, D-type, E-type, and F-type. The section area from O-type to F-type tape gradually increases. Large, the choice of tape model is based on the speed of the delivered power tape, which has a lot of knowledge.
The model selected by the standard model should be compatible with the selected V-belt, otherwise the triangular tape will appear abnormal in the pulley groove. When using triangular tape, it is best to bring the old belt to the agricultural machinery department to avoid mistakes in the model.
Before installation and installation, if the center distance between two axes is adjustable, the center distance should be shortened first, and then the center distance should be adjusted after the tape is installed; if the center distance of the two axes is not adjustable, a triangle belt can be used. Put in the wheel groove first, then turn the other pulley, install the triangle tape, and install the set of triangle tape in the same way. It is forbidden to use hard boring and hard boring on the triangle belt during installation to prevent the triangle tape from being stretched or over-tightened.
To prevent the groove from installing the pulleys, the center of the two pulleys must be aligned. Otherwise, the gusset belt will work unilaterally, which will cause serious wear and affect the service life of the belt.
Elasticity suitable triangular belt too loose not only easy to slip, but also increase the wear of the triangle belt, and even can not transmit power; too tight, not only will make the V-belt elongated deformation, easy to damage, but also cause the engine main bearing and clutch bearing due to Excessive force accelerates wear of the V-belt. The correct inspection method is to apply a vertical pressure of about 2 kg in the middle of each tape by hand, and the amount of sinking is 20 to 30 mm. It is advisable to adjust in time when it is inappropriate.
When the old and new molybdenum double or three or more triangular belts need to be replaced, use the specified type of triangular tape, and require that the tightness of each set of triangular belts be the same, and the old and new mixed equipment must not be used or the number of roots must be reduced. Otherwise, the old and new triangular belts are stressed. Uneven, even the old triangle belt does not work, affecting power transmission and shortening the life of the V-belt.
Strictly prevent the use of smut to prevent the use of oil and muddy triangle belt to prevent contact with acids, alkalis and other corrosive substances, to prevent slipping and corrosion of the V-belt and early damage.
Daily maintenance operators and users must master the correct operation essentials in driving agricultural machinery at ordinary times. In accordance with the technical requirements of the instruction manual, they should avoid rushing and sudden braking; they should also prevent frequent overload operation; long-term decommissioning of the machine tool should defeat the V-belt. Store it separately.

Since the development and launch of Battery Cage System In Poultry for Broiler Chicken Cages and broiler chickens keeping, it has passed through  several stages of modernization. Today Tmax offers 2kinds of Battery Cage Design.Depending on the conditions and needs of the  poultry, enterprise there can be installed batteries from 2 to 6 tiers.

Broiler Cage System

Broiler Battery Cage,Battery Cage System In Poultry ,Battery Cage Design,Battery Chicken Cages

Shandong Shine Machinery Co.,Ltd , http://www.tmaxpoultry.com