What are the benefits of biogas material pretreatment?
Bean
Polishing Machine
Bean Polishing Machine is used to remove
dust or soil from round beans by friction of cloth in the polishing chamber.
Our polishing chamber length is 3meter,
which is the longest design in China.
Its cloth are strong but soft, which can
polish beans very gently and has lower broken rate than using canvas.
We also also install dust collection system
for the bean polishing machine, to collect dust and light impurities to keep
working environment clean.
The Bean Polisher machine can be used for
kidney bean, green mung bean, soybean, black bean etc.
The cloth is soft
but strong.
The Bean Polishing
Machine has half screen. Normally the top half screen is with round hole 2mm. the
bottom half screen may be changed based on diameter of beans, to make sure the
beans will not leak from screens, and small impurities can come out from
screens.
Specification of Bean Polishing Machine
Model
Capacity(t/h)
Power(kw/h)
Dimension(L*W*H
mm)
Weight(kg)
5PJ-3
3
4.37
2000*600*1300
250
5PJ-5
5
5.37
3000*700*1500
450
FAQ:
1. How about payment terms?
Usually is 30%TT
in advance, balance 70%TT before shipment. We also accept L/C at sight, Paypal,
West Union, Money Gram etc.
2. How long is the delivery time?
15 days after
payment
3. How about packaging?
We will pack
machine into plywood box if ship by LCL. If ship by FCL, we will coat machine
with plastic film and fixed well by belt fastener, strong iron wire and steel
wedge etc.
4. Is there any warranty?
Warranty is 1
year.
5. Installation and commission?
We can send
engineer to help installation and commissioning, but you should pay for visa,
air tickets, salary and arrange food and hotel when our engineer in your
country.
6. Do you have some videos that
will help us on assemble or run the machines?
Yes, we have videos on how to assemble and
use our machines, will send you a CD when ship the machine to you.
Bean Polishing Machine Bean Polishing Machine,Bean Polisher,Green Bean Polisher,Beans Polishing Cleaning Machine SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com
Biogas materials generally include crop stalks, forages, leaves, and feces. If lignin, cellulose, hemicellulose, pectin, and waxy compounds in the straw are not destroyed by treatment, they are likely to crust and affect gas production and production. Gas efficiency mainly has the following effects:
1, shorten the gas production time. Straw is difficult to digest, and lignin, fiber, etc. are difficult to be decomposed. Therefore, the straw is pretreated with fast aerobic fermentation such as golden treasure, and then the fermented straw is put into the digester, which can greatly reduce the rot. Time, advance into the gas production phase, saving more than 60% of the time than natural heaping.
2, to prevent crusted obstacles. The surface of the straw has a layer of wax that is not easily destroyed by the biogas microorganisms. If the straw directly under the pool will be a large number of floating crust, it is difficult to be decomposed and fully utilized by fermentation, thereby significantly affect the gas production and gas production efficiency, such as before entering the pool with Glyphon biogas fast rot pretreatment after it was destroyed (Fermentation, softening, rot) can increase gas production by 30-50%.
3, improve gas production efficiency. After the raw material is pretreated, the fermentation time in the pool is naturally reduced, and the inlet temperature can meet the requirements and start gas production. If the raw material is used together with the Gambo Biogas Fermenting Agent, the startup time can be reduced by more than half and can be increased. 50-100% of gas production, gas production is even and stable, and save a lot of manpower time and cost. Details can visit the website or consult.
What are the benefits of biogas material pretreatment?